Vehicle must be 1985 or older street legal gas truck that is a one ton or less
General Street Class Rules
1.All vehicles must have current registration and current state inspection.
2.All registration papers and insurance cards must be available at time of tech.
3.Registration card must match vin. number and plate number.
4.Antique and Classic plate are allowed
Ballast
1.Maximum weight 6500
2. No hanging weights are allowed,
3. No hidden weights are permitted.
4. Weight may be in bed.
5. All weights must be securely fastened.
6. No weight allowed in cab and under hood
Chassis and Suspension
1.Must have OEM suspension
2.The vehicle must retain OEM frame rail
3.No solid suspension.
4.All steering must be OEM steering
5.Traction bars are allowed but must be bolt on
Body
1.The body must be an OEM truck body including the full bed floor.
2.The body must retain the full sheet metal.
3.No mud flaps or dirt deflector
4.Must have all windows, Must have all working OEM lights,
5.Must have all interior panels and dashboard.
6. Flatbeds are permitted and must be a manufactured bed. NO HOMEMADE BEDS.
7. Factory O.E.M. brush guard and snow plow brackets are permitted
Exhaust
1.Exhaust must clear the rear of the truck.
2.May run mufflers or straight pipes.
3. Aftermarket exhaust manifold is permitted.
Safety Equipment
1.Dot helmet is highly recommended.
2.All vehicles must have a 2 1/2 lb. dry chemicals.
3.Seatbelts are required to be worn when hooked to the sled.
4.Leather shoes, Pants, and Long sleeve shirt are mandatory
Drive Line
1.OEM rear and front ends required. Must have come factory in a one ton or
smaller vehicle.
2.OEM transmission and transfer case must be used. Must have come factory in a
one ton or smaller vehicle
Battery
1.Batteries are not allowed in the cab, unless factory installed. Must be in OEM location
Tires
1.Tires must be DOT approved no larger than 35x12.50 or 315x75 Metic
2.Must have factory tire size stamped for verification. If size is removed they will be
considered illegal.
3. No studded tires or tire chains. No alterations to tires permitted. No bar tires
4. Dual wheels are permitted ONLY if factory equipped. Single rear wheel trucks
are not permitted to run dual rear wheels
5.Dual wheel trucks are limited to a tire size of 35x10.50
Brakes
Must have four working brakes, Must have working brake lights
Fuel
1.Gasoline
2.Racing fuel allowed
3.No propane or Nitrous
4. Other oxygen enhancers are not allowed
Hitch
1. Must be Reese style hitch. May be reinforcement. Must not extend forward of
the rear axle.
2. Must be rigged in all directions, Hitch mounting point can not be above frame
rails and must be stationary in all directions
3. No drawbar hitch or trick hitches allowed
4. Hook point must be at the rear most point of the vehicle. and most rearward of
stock location of the tailgate.
4. Maximum hitch height of 26” with a minimum of 3.75”x3” opening.
5. Hitch must be on a level plane with the ground.
Engine
1. Big block or small block
2. Engine must be in OEM location for said make and model
3.No aluminum blocks are permitted
4.No Aluminum heads are permitted
5. Any ignition can be used
6. Aluminum or cast intake allowed
7. One single naturally aspirated carburetors
8. Fan must be shrouded at least 180 degrees on the top
9. No electric fan allowed
General Street Class Rules
1.All vehicles must have current registration and current state inspection.
2.All registration papers and insurance cards must be available at time of tech.
3.Registration card must match vin. number and plate number.
4.Antique and Classic plate are allowed
Ballast
1.Maximum weight 6500
2. No hanging weights are allowed,
3. No hidden weights are permitted.
4. Weight may be in bed.
5. All weights must be securely fastened.
6. No weight allowed in cab and under hood
Chassis and Suspension
1.Must have OEM suspension
2.The vehicle must retain OEM frame rail
3.No solid suspension.
4.All steering must be OEM steering
5.Traction bars are allowed but must be bolt on
Body
1.The body must be an OEM truck body including the full bed floor.
2.The body must retain the full sheet metal.
3.No mud flaps or dirt deflector
4.Must have all windows, Must have all working OEM lights,
5.Must have all interior panels and dashboard.
6. Flatbeds are permitted and must be a manufactured bed. NO HOMEMADE BEDS.
7. Factory O.E.M. brush guard and snow plow brackets are permitted
Exhaust
1.Exhaust must clear the rear of the truck.
2.May run mufflers or straight pipes.
3. Aftermarket exhaust manifold is permitted.
Safety Equipment
1.Dot helmet is highly recommended.
2.All vehicles must have a 2 1/2 lb. dry chemicals.
3.Seatbelts are required to be worn when hooked to the sled.
4.Leather shoes, Pants, and Long sleeve shirt are mandatory
Drive Line
1.OEM rear and front ends required. Must have come factory in a one ton or
smaller vehicle.
2.OEM transmission and transfer case must be used. Must have come factory in a
one ton or smaller vehicle
Battery
1.Batteries are not allowed in the cab, unless factory installed. Must be in OEM location
Tires
1.Tires must be DOT approved no larger than 35x12.50 or 315x75 Metic
2.Must have factory tire size stamped for verification. If size is removed they will be
considered illegal.
3. No studded tires or tire chains. No alterations to tires permitted. No bar tires
4. Dual wheels are permitted ONLY if factory equipped. Single rear wheel trucks
are not permitted to run dual rear wheels
5.Dual wheel trucks are limited to a tire size of 35x10.50
Brakes
Must have four working brakes, Must have working brake lights
Fuel
1.Gasoline
2.Racing fuel allowed
3.No propane or Nitrous
4. Other oxygen enhancers are not allowed
Hitch
1. Must be Reese style hitch. May be reinforcement. Must not extend forward of
the rear axle.
2. Must be rigged in all directions, Hitch mounting point can not be above frame
rails and must be stationary in all directions
3. No drawbar hitch or trick hitches allowed
4. Hook point must be at the rear most point of the vehicle. and most rearward of
stock location of the tailgate.
4. Maximum hitch height of 26” with a minimum of 3.75”x3” opening.
5. Hitch must be on a level plane with the ground.
Engine
1. Big block or small block
2. Engine must be in OEM location for said make and model
3.No aluminum blocks are permitted
4.No Aluminum heads are permitted
5. Any ignition can be used
6. Aluminum or cast intake allowed
7. One single naturally aspirated carburetors
8. Fan must be shrouded at least 180 degrees on the top
9. No electric fan allowed